Can't see the region you're looking for? You can find a list of our global locations here
Altro Whiterock PVCu sheet printed with uv cured ink for areas requiring bespoke decorative design, logos and signage.
Extruded semi-rigid PVCu sheet.
Colour:
Surface finish:
Thickness:
Size:
Weight:
Maximum service temp:
Can be printed onto white, or from sheets from the Altro Whiterock Satins or Altro Whiterock Chameleon range
Satin from the Altro Whiterock Satins range or Gloss from the Altro Whiterock Chameleon range
2.5mm
2500 x 1250mm 3000 x 1220mm sheets can be CNC routed and cut to suit setting out and jointing configurations
3.6 kg/m²
60°C
Altro Whiterock Digiclad (Custom) extruded sheets can be hardcoated with a gloss or matt coating for added scratch resistance. This will give additional, but limited resistance to some forms of graffiti. (Hardcoating is optional and being a liquid coating there is a risk of inclusions appearing in the surface finish). The product is supplied to site with protective film or bubble wrap to its face.
It is ideal for applications requiring a hygienic easy-to-clean, almost maintenance free wall finish, which conforms to UK hygiene requirements.
The sheets can be fixed directly to most dry substrates depending on their surface suitability, using one of the following methods:
Cutting to be carried out using a fine tooth circular saw with TCT cutting blades and pressure guide, fine tooth blade jigsaw, a fine tooth handsaw, a high speed TCT router.
Can be jointed in any of the following ways. Contact Altro for relevant drawings
Altro Whiterock Digiclad (Custom) is normally thermoformed on site, so that window and door reveals are neatly clad without a corner trim.
Note: the corners cannot be thermoformed if the gloss or matt hard coating has been applied. In these circumstances, the internal corners can be scribed and butted into the corner and sealed with silicone sealant. The external corners will be fitted using an unprinted 20 x 20mm pvc angle colour co-ordinated to match the base sheet.
The product can be cleaned using a soft cloth and suitable diluted mild detergent.
Do not use abrasive pads or wire wool.
Do not clean above 60°C.
Cleaning cards are available on request.
Resistant to a wide range of chemicals, specific details on request.
Made to order with 21 day lead time – please see the Altro Whiterock Digiclad brochure.
Sheets should be stored flat, fully supported and left for 24 hours to attain the ambient room temperature prior to installation(min 14°C).
Altro Whiterock Digiclad has a maximum working temperature of 60°C.
| Property | Standard | Value |
|---|---|---|
| Surface finish | Satin | |
| Thickness | 2.5mm | |
| Size | 2500 mm x 1220 mm 3000 mm x 1220 mm |
|
| Weight | 3600 g/m² | |
| Density | ISO 1183 | 1.44 g/cm3 |
| Maximum service temperature | 60℃ | |
| Hardness (Shore D) | ISO 868 | 76 |
| Fire resistance | EN 13501-1 BS 476 pt 6 BS 476 pt 7 |
B- s3, d0 Class 0 (when fixed to a non-combustible substrate) Class 1 |
| Notched Impact resistance | ISO 179/1ea | 9.5 KJ/m² |
| Impact resistance | ISO 179/1eU | +20℃ without breakage 0℃ without breakage -20℃ without breakage |
| Flexural strength | ISO 178 | 70 MPa |
| Tensile strength | ISO 527 | 52 MPa |
| E-modulus of elasticity | ISO 527 | 2950 MPa |
| Compressive strength | DIN 53421 | 68 N/mm² |
| Vicat softening point VST/B | ISO 306 | 73℃ |
| Expansion coefficient | DIN 53752 | 0.07 mm/mK |
| Heat distortion temperature | ISO 75-2 | 60℃ |
| Water Absorption | ISO 62 | ≤ 0.1% |
| Thermal Conductivity | EN 12524 | 0.17 W/mK |
| ″U″ value (bonded to 100mm block wall) | DIN 52612 | 1.8 W/m² ℃ |
| Moisture Vapour Transmission rate (MVTR) | ASTM E96 | ≤ 0.12g/m²/24hrs |
| Water vapour resistivity | ASTM E96 | 3.82 x 105GN.S/Kg.m |
| Property | Standard | Value |
|---|---|---|
| Surface finish | Gloss | |
| Thickness | 2.5mm | |
| Size | 2500 mm x 1220 mm 3000 mm x 1220 mm |
|
| Weight | 3500 g/m² | |
| Density | ISO 1183 | 1.41 g/cm3 |
| Maximum service temperature | 60℃ | |
| Hardness (Shore D) | ISO 868 | 80 |
| Fire resistance | EN 13501-1 BS 476 pt 6 BS 476 pt 7 |
B- s3, d0 Class 0 (when fixed to a non-combustible substrate) Class 1 |
| Notched Impact resistance | ISO 179/1ea | 2.9 KJ/m² |
| Impact resistance | ISO 179/1eU | +20℃ without breakage 0℃ without breakage -20℃ without breakage |
| Flexural strength | ISO 178 | 94 MPa |
| Tensile strength | ISO 527 | 59 MPa |
| E-modulus of elasticity | ISO 527 | 3700 MPa |
| Compressive strength | DIN 53421 | 70 N/mm² |
| Vicat softening point VST/B | ISO 306 | 80℃ |
| Expansion coefficient | DIN 53752 | 0.08 mm/mK |
| Heat distortion temperature | ISO 75-2 | 60℃ |
| Water Absorption | ISO 62 | ≤ 0.1% |
| Thermal Conductivity | EN 12524 | 0.17 W/mK |
| ″U″ value (bonded to 100mm block wall) | DIN 52612 | 1.8 W/m² ℃ |
| Moisture Vapour Transmission rate (MVTR) | ASTM E96 | ≤ 0.12g/m²/24hrs |
| Water vapour resistivity | ASTM E96 | 3.82 x 105GN.S/Kg.m |
NOTE: “Altro Ltd” (“Altro”) endeavours to ensure that advice and information given in Product Data Sheets, Method Statements and Material Safety Data Sheets (all known as Product Literature) is accurate and correct. However, where Altro has no control over the selection of its products for particular applications, it is important that any prospective customer, user or specifier, satisfies him / herself that the product is suitable for the intended application. In this process, due regard should be taken of the nature and composition of the background / base and the ambient conditions both at the time of laying / applying / installing / curing of the material and when the completed work is to be brought into use.
However, as site conditions and the execution of the work are beyond our control, we accept no resultant liability.
Altro’s policy is one of continuous research and development and we reserve the right to update our products and information at any time without prior notice.
