Can't see the region you're looking for? You can find a list of our global locations here
The Altro Wood Collection is manufactured with a directional pattern. We recommend that the material is laid from sheet to sheet with a random pattern match and that cross joints should be avoided where possible.
Diagram 1 – Ensure that both sheets are laid out in the same direction.
Diagram 2 – Both edges of the sheet have a narrow edge which needs to be trimmed to leave a full plank. Overlap sheet A over sheet B as indicated above and cut in the joint, cutting both sheets so that the join runs down the edge of the planks.
| Pattern repeat | 1000mm |
| Beech | plank lengths 333.3mm, width 62.5mm |
| Walnut, Maple & Cherry | plank lengths 550mm and 450mm, width 100mm |
| Oak | plank length 500mm, width 100mm plank length 1000mm, width 125mm plank length 1000mm, width 166.6mm plank length 550mm and 450mm, width 100mm |
NOTE: “Altro APAC Pty Ltd” (“Altro”) endeavours to ensure that advice and information given in Product Data Sheets, Method Statements and Material Safety Data Sheets (all known as Product Literature) is accurate and correct. However, where Altro has no control over the selection of its products for particular applications, it is important that any prospective customer, user or specifier, satisfies him / herself that the product is suitable for the intended application. In this process, due regard should be taken of the nature and composition of the background / base and the ambient conditions both at the time of laying / applying / installing / curing of the material and when the completed work is to be brought into use.
However, as site conditions and the execution of the work are beyond our control, we accept no resultant liability.
Altro’s policy is one of continuous research and development and we reserve the right to update our products and information at any time without prior notice.
