¿No puedes ver la región que buscas? Puedes encontrar una lista de nuestras ubicaciones globales aquí.
Durable protection for walls, doors and corners. Suitable for busy public areas.
Extruded semi-rigid PVCu sheet.
Colour:
Surface finish:
Thickness:
Size:
Weight:
Maximum service temp:
various
textured
2.5mm
3000 x 1220mm
3.6 kg/m²
60°C
Altro Fortis Titanium extruded sheet is supplied with a protective film on its face which can be left in place until the room is ready for use.
This also helps to protect the surface from dust while other trades are in the area. It is ideal for applications requiring a durable easy-to-clean, almost maintenance free wall finish.
The sheets can be fixed directly to most dry substrates depending on its surface suitability, using one of the following methods:
A jigsaw is the best method, however a fine toothed hand saw or circular saw with pressure guide can also be used.
- see relevant detailed drawings
- see relevant detailed drawings
Altro Fortis Titanium is normally thermoformed on-site, so that window and door reveals are neatly clad without an edge joint. However, profiles are available for the selfinstaller to cope with these details. Vulnerable external corners can be over-clad with Altro Fortis corner protection or stainless steel corner protectors.
Regular cleaning using a soft cloth and a suitably diluted mild detergent is all that is normally required. Stubborn marks can be removed with Altro Cleaner A859 or non-abrasive domestic type cream bath cleaner.
Do not use abrasive pads or wire wool. Do not clean above 60°C. Cleaning cards are available on request.
Resistant to a wide range of chemicals, specific details on request.
Ex-stock.
Sheets should be stored flat, fully supported and left for 24 hours to attain the ambient room temperature prior to installation (min 14°C).
Altro Fortis Titanium has a maximum working temperature of 60°C. For temperatures above this use stainless steel. Stainless steel must be used for all open flame areas (available cut to size). If a layout showing the position of equipment can be supplied, we will provide specific advice as to the best combination of materials to use.
| Property | Standard | Value |
|---|---|---|
| Surface finish | Textured | |
| Thickness | 2.5mm | |
| Size | 1220 x 3000 mm | |
| Weight | 3600 g/m² | |
| Density | ISO 1183 | 1.44 g/cm3 |
| Maximum service temperature | 60℃ | |
| Hardness (Shore D) | ISO 868 | 79 |
| Fire resistance | EN 13501-1 | B- s3, d0 |
| Notched Impact resistance | ISO 179/1ea | 9.5 KJ/m² |
| Gardner impact resistance | ASTM D4226 | 131 in-lb |
| Flexural strength | ISO 178 | 70 MPa |
| Tensile strength | ISO 527 | 52 MPa |
| E-modulus of elasticity | ISO 527 | 2950 MPa |
| Compressive strength | DIN 53421 | 68 N/mm² |
| Vicat softening point VST/B | ISO 306 | 73℃ |
| Expansion coefficient | DIN 53752 | 0.07 mm/mK |
| Heat distortion temperature | ISO 75-2 | 60℃ |
| Water Absorption | ISO 62 | ≤ 0.1% |
| Thermal Conductivity | EN 12524 | 0.17 W/mK |
| ″U″ value (bonded to 100mm block wall) | DIN 52612 | 1.8 W/m² ℃ |
| Moisture Vapour Transmission rate (MVTR) | ASTM E96 | ≤ 0.12g/m²/24hrs |
| Water vapour resistivity | ASTM E96 | 3.82 x 105GN.S/Kg.m |
Please refer to material safety data sheets prior to installation.
Always wear correct PPE whilst installing Altro products.
NOTE: “Altro Ltd” (“Altro”) endeavours to ensure that advice and information given in Product Data Sheets, Method Statements and Material Safety Data Sheets (all known as Product Literature) is accurate and correct. However, where Altro has no control over the selection of its products for particular applications, it is important that any prospective customer, user or specifier, satisfies him / herself that the product is suitable for the intended application. In this process, due regard should be taken of the nature and composition of the background / base and the ambient conditions both at the time of laying / applying / installing / curing of the material and when the completed work is to be brought into use.
However, as site conditions and the execution of the work are beyond our control, we accept no resultant liability.
Altro’s policy is one of continuous research and development and we reserve the right to update our products and information at any time without prior notice.
