Can't see the region you're looking for? You can find a list of our global locations here
Please refer to the Altro wall sheet fitting guide for detailed installation instructions and tools required.
Altro Whiterock Splashbacks have a maximum working temperature of 60°C, and must not be installed in areas where this temperature could be exceeded. This includes areas around air fryers and heat vents. For temperatures above this use stainless steel. Stainless steel must be used for all open flame areas (available cut to size) and must be extended to a minimum of 300mm past the heat source. If a layout showing the position of equipment can be supplied, specific advice can be provided as to the best combination of materials to use.
Before using the adhesive, users must refer to the SDS (Safety Data Sheet) for correct safety advice and carry out a COSHH (Control of Substances Hazardous to Health) assessment and risk assessment. Always wear appropriate PPE (Personal Protective Equipment) and RPE (Respiratory Protective Equipment) when handling adhesives and ensure the area is adequately ventilated. In the case of contact with eyes or skin, rinse immediately with plenty of water and seek medical advice.
Altro splashbacks can be jointed using any of the following methods:
*not for secure environment installations, please refer to Altro Technical services.
For detailed instructions on how to use the above jointing methods please refer to the Altro wall sheet fitting guide.
Altro Limited, Works Road, Letchworth Garden City, Hertfordshire SG6 1NW. Altro, Altro Whiterock and AltroFix are trademarks of Altro Limited.